Consider first your goals for the type of beadmaking class you want to take:

Do you already know that beadmaking is something you absolutely want to do? In that case, you will want to look for a comprehensive beginning class that gives you a good grounding in safety and technique over the course of several days. With a knowledgeable and experienced instructor, this type of class is the wisest investment of time and money you could make. But some people aren’t quite sure if beadmaking is going to be their “cup of tea”…

It could be that what you want first is a quick overview of the safety issues, costs and equipment involved, and the experience of making a few beads. If you aren’t sure that you want to commit the time and money to beadmaking, this type of class can give you a feel for whether you like it, are good enough at it, and feel comfortable enough to pursue it further. This is what we call an “Introduction to Beadmaking”.

An introductory class can be accomplished by 3 – 4 hours of one-on-one instruction with a knowledgeable teacher, or a full day (6 – 8 hours) in a class with other students. Regardless of whether you get your introduction to beadmaking individually, or in a class with others, you should try to find an experienced instructor who will cover basic safety information about the torch, equipment and proper handling of the fuels/gases that you will be using. However, please understand that a three to six hour introductory class is not an adequate substitute for a comprehensive beginner’s class.

Once you’ve taken an “Introduction”, it’s very possible that you’ll join the ranks of the glass obsessed: you won’t be able to stop thinking about melting glass, you’ll find yourself making beads in your head before you drift off to sleep at night, and you’ll be considering where to set up your torch. Now is the time when you need to start looking for a comprehensive course in beginning beadmaking: Do this before you set up your beadmaking studio - you’ll receive lots of useful information in a comprehensive class that can help you make safe and appropriate equipment and set-up choices based on your individual situation.

How to find a good class:

Take the time to do your research, and don’t be afraid to ask questions. Here are some of the questions you can and should ask the teacher or group sponsoring the class:

* Who is teaching the class?

* How much experience does this instructor have?

Not all well-known beadmakers are great teachers, and not all great teachers will be particularly gifted beadmakers. However, a beadmaking instructor should have sufficient knowledge and technical proficiency in making beads to allow them to answer any questions a beginner will have. This includes guiding students through understanding the all-important safety issues, basic beadmaking techniques, the physical and chemical properties of glass, using and maintaining your equipment and setting up a beadmaking studio, based on their knowledge of and experience with hot glass.

Unfortunately, it’s difficult to measure a person’s beadmaking experience in months and years, because not many people make beads as a full time job. Gaining experience in hot glass is a cumulative exercise; advanced skill levels and understanding are reached only after many hours of continuous practice. This is why someone who makes beads for a couple of hours on weekends for three years might not have achieved the proficiency and skill level of another beadmaker who devotes 20+ hours a week, but has only been doing it for a year. So, although there will always be exceptions to the rule, a good rule of thumb regarding how much experience a beadmaking instructor should have is at least two to three years’ experience in making beads, before teaching others.

No matter how gifted a teacher someone is, or how kind and patient they seem, where beadmaking instruction in concerned, there is no substitute for being taught by someone with actual long-term experience creating beads out of hot glass.



Helpful questions to ask when looking for a qualified instructor:

Ask how long your instructor has been working in hot glass, and whether or not that’s full time, part-time or just as a weekend hobby.
Ask how long they have been teaching.
Ask who the instructor has studied with, or taken beadmaking classes from.
Ask to see pictures of the instructor’s beads.
Ask if the instructor has attended the ISGB Instructor’s Seminar. (And if not, please suggest that they do so!)
Ask for recommendations of good instructors from other beadmakers.


* How many hours of instruction will you receive?

A comprehensive beginning beadmaking class should be no less than 12 hours of instruction,regardless of whether that is over the course of several days or evenings, or in two consecutive days. Listed below is a basic outline of what should be covered in a beginning class. Even if you are receiving individual instruction, it is just not possible to cover everything you need to know about safety, equipment, glass properties, annealing and technique in a few hours time, and still allow time for questions, adequate supervised practice at the torch, and feedback for all the students from the instructor.

* How many people (at most) will be in the class?

For safety’s sake, there should be no more than 6 people in a beginning class with one instructor. If there is an experienced teaching assistant there to help supervise students when they are working on torches, the number of students should still be no more than 10. Regardless of how good a teacher is, a room full of beginners who have never worked at a torch with hot glass need to be carefully supervised, for everyone’s safety.

* Will there be a torch for every student?

Part of what you want to get out of a beginning beadmaking class is time on a torch. In a 12-hr class at least 4 to 5 hours of that should be spent on a torch. If not enough torches are available to go around, then the class should be longer to make up for this fact. Each student should get at least 4 hours of practice time on a torch.

* What type of torch will you be learning on?


There are generally two types of torches used to teach beadmaking: a single fuel torch, (such as a Hothead, Fireworks, or Quiet torch), and a mixed gas (propane/oxygen) torch (such as the Minor Bench Burner, Carlyle mini, GTT Bobcat, or others). A single fuel torch generally uses MAPP gas (or propylene) and does not require a major commitment of money or space to use it. It is however, noisy, can produce soot in the glass if not used properly, and melts the glass more slowly than a mixed gas torch. This is often considered a benefit for a beginner, because it will mean more control over the glass.

A mixed gas torch uses propane as the fuel, and oxygen as an oxidizer, which produce a very hot, quiet, adjustable flame. This type of torch does require a permanent set-up and a greater outlay of money for equipment and supplies. Both torches are fine to learn on; however, if you wish to get into beadmaking as a full time occupation, you will probably be investing in a mixed gas torch sooner or later, and may prefer to learn on one initially.


* Does either the instructor or the class sponsor carry liability insurance?

When appropriate safety precautions are taken, glass beadmaking is no more dangerous than driving a car. However, you wouldn’t want to be traveling along a highway surrounded by Driver’s Ed cars with learners behind the wheel, none of whom carried insurance, would you? In all probability, nothing bad will happen…. Right?

The risk might be slight, but the danger is no less real.

At this point in time, instructors in the beadmaking community are starting to realize the importance of carrying liability insurance, in order to protect themselves and their students should an accident happen. Unfortunately, it can be very costly, and in some circumstances, not available to everyone who teaches. Thus it is usually the exception rather than the norm. The ISGB is attempting to address this issue for instructors, but we’re still looking for workable solutions.

In a perfect world, every instructor or sponsoring organization would carry liability insurance against any accidents that might happen in a room full of beginners, working with hot glass and open flames. In reality, you may have a hard time finding an instructor who carries this type of insurance. (But that doesn’t mean you shouldn’t ask!)

It is our hope that liability insurance will become more reasonably available soon, and that having it before starting to teach will become an accepted practice for all instructors and teaching venues in the not too distant future. Liability insurance is a good investment to protect all parties involved in a beadmaking class.

Your safety is your responsibility:
It is up to you to weigh the risks and do what feels most comfortable to you.

Recognize that you may have to travel some distance to receive proper instruction in making glass beads. It’s better to wait and plan to take a safe and comprehensive class from a knowledgeable instructor, that will give you what you need to start your journey as a beadmaker, than to waste time and money on an incomplete, frustrating or dangerous experience.

And a few other questions that you may also want to ask:

Does the cost of the class cover all the materials, glass, supplies and equipment you will be using?
Will a class outline be distributed, so you can concentrate on watching the instructor demo, rather than taking notes?
Will there be any supplemental handouts or reference materials given to you at the end of class?
Will your beads from the class be annealed; How / when will you get them?
Once glass has been melted, it needs to “soak” at a certain temperature for a specific amount of time, and then be cooled slowly in a precise manner only possible with a kiln. This is just not possible using a fiber blanket or vermiculite. If your beads from class have not been annealed during the class, it is often possible to “batch anneal” them later, but some of them may crack or break due to unrelieved stress in the glass.

What constitutes a “safe” beadmaking class environment?


* Ask about the actual classroom space where your class will take place:

There should be adequate ventilation for the size of the room. Proper ventilation requires three things: A way to remove stale air or fumes from the work area (preferably vented to the outside), clean make-up air brought into the work area, and a method of keeping the air circulating in the room. A fan and an open window are not sufficient if there are several torches turned on at the same time. All torches pull oxygen from the air for combustion, exhausting the room’s fresh air supply more quickly and release harmful combustion gases that can build up in a poorly ventilated workspace.

Without proper ventilation, after a long day hunched over a torch, you might experience headaches, dizziness, tightness in your chest, and other mild, but worrisome, symptoms. If so, turn off your torch, tell the instructor, and go outside for some fresh air.

Every student should be provided with proper safety glasses: Clear plastic “science class” goggles or sunglasses will protect your eyes from flying glass but not from the potentially damaging light coming off the flame and the hot glass. Student safety glasses should have a rose didymium or stronger filter on the lenses. (The lens will be dark purple/gray.)

The workspace near the torches should be clear of flammable/combustible materials, because flying chips of hot glass can travel a good distance.
Torches should be securely attached to the tabletop, and matches, flint strikers or electronic arc lighters should be provided for lighting the torch. (Not butane lighters.)

The floor and tabletop should be heatproof. (Metal or tile, etc.)
The instructor or class sponsor should let you know ahead of time about appropriate clothing safety issues: Long hair should be tied back, you should wear long sleeved, cotton or natural fiber clothing (polyester melts; need we say more?), and no shorts, plunging necklines or open toed sandals… just in case. Long artificial nails can sometimes pose a hazard for beginners.


A Few Words of Wisdom for Teachers and Students:
The Role of Copying and Artistic Integrity in the Classroom

Copying

Copying and repetition are an integral part of the learning process. Don’t be afraid to take what your instructor has demonstrated in class, and practice, practice, practice it at home. Instructors shouldn’t be demonstrating any techniques that they don’t want their students copying; nothing learned in class should be off limits to the students who paid for the instruction.

Artistic Integrity

Once you set up your studio and start making beads in earnest, it’s important to try to begin to “find your own voice” in the beads you make, and not continue to copy the exact beads that you have learned from your instructor. When you have a bead that you really like, but you have learned from someone else, try to assess what it is that appeals to you about it, and then take that idea, technique, or color scheme, and play with it.

A common occurrence in beadmaking classes is students bringing in beads that they are intrigued with, to ask their instructor how a certain look was achieved. If the technique is a simple or common one, most instructors will be happy to demonstrate, if time permits. Please respect the artistic integrity of other beadmakers, and don’t ask your instructor to speculate or show you how another beadmaker achieves something that makes their work uniquely their own.

This article has been excerpted from the ISGB Educational Standards Page. The full text may be seen HERE